The RX-MLC (Machine-Logic Controller) radio receiver is a receiver with proportional and digital outputs that incorporates a Programmable Logic Unit (PLC). The proportional outputs can be programmed as both PWM or Voltage Control. In addition, a combination of both is also possible. The receiver has 1 Main Contact digital output (Stop) as standard and a double E-stop relay module with feedback monitoring can be installed optionally. In addition, there are 12 digital outputs, 8 proportional outputs. The receiver also has a CAN-Bus port and a connection for a backup cable as standard. The RX-MLC is certified by the TUV with SIL 3 according to EN 62061 and PLe CAT 3 according to EN 13849-1.
It is possible to make a radio remote control system perfectly to your liking. Please contact us for more information.
Inputs: 8 programmable inputs: digital On/Off or analog 0-10V, 0-30V, 0-20mA or 4-20mA;
Outputs: 8 independent programmable proportional PWM/Voltage Control, also programmable as 16 on/off outputs, 6 Programmable on/off at 12/24VDC, 8A max, sourced by MC output, 6 Programmable on/off at 12/24VDC, 8A max, externally sourced, GND side switching capable, 2 CAN-Bus;
HS2 housing;
Output wiring via 70p connector;
External antenna via TNC connector;
Frequencies: 4xxMHZ, 8xxMHz, 9xxMHz, 1.2GHz en 2.4Ghz;
Operating temperature: -25ºC t/m +70ºC;
12/24VDC (8-36VDC max.) power supply;
IP65 protection rating;
Weight: 1700 gram;
Fully customisable;
