- Programmable through H-link
Feedback
Receiver with the latest and safest technologies, 14, 22 or 30 potential free relays and equipped with a terminal strip for wiring.
Home > Radio remote control receivers
Hetronic supplies radio remote control receivers that guarantee maximum safety for both your operating processes and the operator. All receivers within our broad range are very versatile and are fully programmable, so that they do exactly what is necessary – in combination with the transmitter – for safe and efficient control of your industrial process and communication with your PLC.
Regardless of what your application requires, AC or DC, solid-state or serial interface outputs, relay switch output, Profinet, CANBUS, Profibus, RS232, Hetronic radio remote control receivers provide you with a suitable solution for the control of your fixed and mobile systems and machines.
For more information, quotes or other questions
Receiver with the latest and safest technologies, 14, 22 or 30 potential free relays and equipped with a terminal strip for wiring.
Receiver with 14, 22 or 30 potential-free relays with 70-pin connector allowing quick connection of the receiver.
Receiver with 4 proportional voltage outputs and 18 or 26 potential-free relays.
Small, lightweight receiver designed for mobile applications requiring up to 4 proportional outputs. The proportional outputs can be used to control current-controlled PWM valves or actuator motors with potentiometer feedback. The proportional outputs can also be set as digital outputs making a maximum of 17 digital outputs.
Versatile proportional receiver with standard 8 proportional outputs, which can be independently set as current-controlled PWM, voltage-controlled PVG or linear voltage such as 0..10V.
Powerful receiver with built-in PLC functionality, 8 proportional outputs, 12 digital outputs and 8 inputs.
Receiver for all CAN bus protocols certified by the TUV with SIL 3 according to EN 62061 and PLe CAT 3 according to EN 13849-1.
Receiver for use in an Ethernet network such as PROFINET.
Receiver to connect to an RS232 serial network.
The RX-MFSHL-DC8 and RX-MFSHL-DC16 are made for standard mobile applications with limited features without sacrificing safety and reliability. These receivers have high reliability, high quality and are competitively priced.
The RX-MFSHL-AC8 and RX-MFSHL-AC16 are made for standard AC applications with limited features without sacrificing safety and reliability. These receivers have high reliability, high quality and are competitively priced. These receivers have a 10, 16 or 24 pin Harting connector for quick installation.
CAN-bus receiver for less demanding applications.
The versatile radio remote control range of Hetronic receivers is available for controlling every imaginable industrial system remotely, with an ergonomic, safe and efficient Hetronic radio remote control receiver.
Hetronic supplies radio remote control receivers that guarantee maximum safety for both your operating processes and the operator. All receivers within our broad range are very versatile and are fully programmable, so that they do exactly what is necessary – in combination with the transmitter – for safe and efficient control of your industrial process and communication with your PLC.
Regardless of what your application requires, AC or DC, solid-state or serial interface outputs, relay switch output, Profinet, CANBUS, Profibus, RS232, Hetronic radio remote control receivers provide you with a suitable solution for the control of your fixed and mobile systems and machines.
The simplest receivers are the RX-MFSHL AC8/AC16 and DC8/DC16. These receivers are based on transistor technology, work at 869MHz or 2.4GHz with a typical range of 30 to 50 metres and feature 8 or 16 outputs. The AC variant works between 24VAC and 230VAC and the DC variant works at 12 or 24VDC. The DC16 even has a PWM output for proportional control.
All the MFSHL receivers are programmed depending on the application. Example applications for the RX-MFSHL AC8/AC16 are hoists and winches, and the RX-MFSHL DC8/DC16 are often used on a truck, tractor, pallet truck, trailer or small hydraulic crane.
he more versatile and most popular RX-14HL receivers are available with 14, 22 or 30 potential-free relays. It is also possible to combine it with an analogue output card to obtain a total of 1 analogue output and 20 relays, 1 analogue output and 28 relays, 4 analogue outputs and 18 relays or 4 analogue outputs and 26 relays. In addition to the stated outputs, this receiver also has 1 or 2 potential-free stop relays SIL 3 (EN 62061). These receivers work with frequency modules that can be set up permanently or as locater on 32 channels at 419, 429, 434, 447, 458, 480 or 869 MHz for at least 100 metre range and 1.2 or 2.4 GHz for 70 metre range. This receiver can be connected to both 12 / 24 VDC and 48 / 115 / 230 VAC. Also all receivers in this series 4 have insulated digital inputs VDC/VAC and can be upgraded with 12 extra analogue inputs that can be set up as 0-10, 0-30 VDC, 0-20, 4-20 mA or as digital input VDC. The outputs and inputs are programmed for you depending on the application. These receivers are supplied dependent on your situation with a 70-pin connector plug, a 16/24/32-pin connector plug, a cable gland, 2 metres of power cord or a connector and/or cable custom made for you. Example applications are container truck, construction cranes or tandem controls of 2, 3 or 4 overhead cranes as master-slave or master-master.
For mobile hydraulic applications, the RX-BMS HL has been developed. Since 2015, this has been the successor to BMS-1 and BMS-2. The advantage of the BMS-HL is that it is fully programmable and that it can control a combination of digital black/white outputs, analogue linear outputs (e.g. 0-10VDC), flow valves (e.g. HAWE), and load-sensing valves (e.g. PVG32). As standard, this receiver has 12 digital and 8 proportional outputs, 3 analogue inputs and a stop output. Optionally the stop-function can be fitted potential-free, and the receiver can be upgraded with 8 or 16 potential-free relays or 12 analogue inputs. This receiver works with frequency modules that can be set up permanently or as locater on 32 channels at 419, 429, 434, 447, 458, 480 or 869 MHz for at least 100 metre range and 1.2 or 2.4 GHz for 70 metre range. This receiver can be connected using either 12 or 24 VDC. It is supplied with a 70-pin power connector for which we can also supply a female connector, depending on your application. Examples applications for the BMS receiver are truck-mounted crane, telescopic cranes, vacuum trucks, telescopic boom lifts on caterpillars, forestry cranes or horticulture machines.
Specially for maximum 4 PWM outputs, we have the DC-Mobile receiver. This has 4 PWM outputs, 12 digital outputs and 5 inputs. This receiver can also be custom programmed. It works on 12 or 24VDC and has a 30-pin connector for the output wiring. The main benefit versus the BMS-HL is that the DC-Mobile has a smaller casing and is cheaper. . Example applications for the DC-Mobile receiver are hydraulic winches, small loader cranes and caterpillar vehicles.
If your application has many and advanced logic functions, then the RC-MLC is the right solution. This receiver is combined with a PLC so that programme logic circuits via a GUI that controls the outputs depending on other outputs, inputs, timers and other conditions. The MLC works on 12 or 24 VDC and has 12 digital outputs, 8 analogue outputs and 16 inputs.
Example applications for the MLC are ground drilling rigs, boom lifts, SPMT/AGV vehicles and concrete mixers.
For applications that already have a PLC, we can control these directly via our Hetronic bus receivers. The CAN-bus receiver can be set up for the protocols CANopen, SAE-J1939, Parker IQAN and generic CAN. This CAN-bus receiver has 2 CAN-headers that can be programmed separately. It also has 2 extra changeover relays and 1 or 2 stop relays.
The RS-232/485 receiver is used for RS232, RS485 and ModBus. This receiver has 1 stop relay.
For ProfiBus, we will supply a receiver with SIL-1 or SIL-2.
Just like the CAN-bus, the ProfiNET receiver has 2 changeover relays and is fitted with 2 stop relays.
All bus receivers work on 12 or 24VDC, and can be supplied with both half-duplex and full-duplex feedback. Via the feedback, LEDs can be activated on the transmitter and, for instance, a text or graphic figures shown on the display.
As a licensed assembling partner of Hetronic International, we carry out repairs and maintenance on all Hetronic radio control systems in our Service Center. We also offer you, often directly from stock, an extensive range of original Hetronic parts and spare parts.
For more information about radio control transmitters, quotes or other questions. You can contact us, we will be ready for you.
Hetronic is the global market leader in radiographic controls for industrial applications. With Hetronic you are assured of worldwide coverage for the delivery, installation and maintenance of your radio transmitters and receivers.
© Copyright Hetronic.nl 2023 | Developed by FindingTheRoad